Thuyền bay hơi hoạt động như thế nào
Mar 09, 2022
Thuyền bay hơi là các bộ phận bằng gốm đóng vai trò như vật chứa kim loại (nhôm nguyên chất) được bay hơi. Chúng có chức năng như băng cản nhiệt thuyền bay hơi và một dây nhôm được nạp liên tục được nung nóng trong chân không cao bởi dòng điện, để đầu tiên dây nóng chảy và sau đó bay hơi. Do cấu trúc và kết cấu bề mặt đặc biệt, một bể nóng chảy được hình thành và phân phối tối ưu trên thuyền, do đó đảm bảo một đám mây hơi đồng nhất. Hơi kim loại sau đó được lắng đọng trên một đế nằm phía trên đám mây hơi.
Vật liệu cho thuyền bay hơi
Có nhiều yêu cầu khác nhau mà thuyền bay hơi phải đáp ứng. Đối với nguyên tắc của nhiệt điện trở để hoạt động, chúng phải dẫn điện; đồng thời, chúng cần có điện trở đủ cao để có thể sưởi ấm chúng. Hơn nữa, chúng phải chịu được nhiệt độ cao và trơ đối với kim loại nóng chảy. Để kết hợp những đặc tính này, gốm hỗn hợp được làm từ hai hoặc ba thành phần.
Two-component evaporation boats contain titanium diboride and BORON NITRIDE. Due to its bonding structure, titanium diboride offers excellent resistance to high temperatures and remains inert even to non-ferrous metal melts. It also improves the wettability of the evaporation boat through liquid aluminum and ensures a melting bath with an extensive surface. For example, when used for aluminum vapor deposition, it's completely wetted by liquid aluminum. In addition, titanium diboride is a very good electrical conductor. Boron nitride is added as a non-conductive material to set the electrical resistance of the evaporation boat.
Three-component mixed ceramics also include aluminum nitride. This material has very good thermal conductivity which makes it particularly suitable for large evaporation boats to ensure they heat up quickly and uniformly. Compared to two-component evaporation boats, the three-component versions have a shorter lifespan, with lower evaporation rates and less corrosion resistance. At the same time, the wettability of the evaporator is significantly improved and there's greater homogeneity of the vapor-deposited layers. Three-component evaporators are therefore primarily used in the manufacture of capacitors, since this requires a particularly high level of homogeneity in the coatings.






